BushfireSmoke Australia
Get the app
Other Countries

Warrnambool air quality and smoke forecast

Current government PM2.5 readings within 50 km of Warrnambool, with separate NASA GEOS-CF, CAMS and SILAM total-PM2.5 forecasts sampled at the locality centre.

Updated · Location forecast · current monitors within 50 km of Warrnambool · concentrations, not an Australian AQI

Current air quality and forecast

Now · observedGood4.8 µg/m³ median · 1 current monitor
Next 48 hoursGood to Fair5.7–15.0 µg/m³ · 3 of 3 models
Forecast peak15.0 µg/m³13 Oct, 1:00 AM AEDT · CAMS

Nearby fires

150 km radius

No agency fire incidents are currently reported within 150 km of this location.

Agency fire reports updated

Straight-line distance from the Warrnambool centre to the reported incident location, or to the mapped fire boundary where an agency has published one. A fire without a published boundary may extend closer than its reported location suggests.

Last 24 hours and next 48 hours across Warrnambool

200−24 hNow+24 h+48 hµg/m³
Range across monitors
About this chart

The observed line is the hourly median across reporting monitors and the shaded range shows local variation. NASA GEOS-CF, CAMS and SILAM are separate total surface PM2.5 research forecasts sampled near the Warrnambool locality centre. They are not smoke-only, official health forecasts or blended with observations.

Forecast

Next 6 hoursGood2.5–4.7 µg/m³ · 3 of 3 models
Next 12 hoursGood5.7–11.6 µg/m³ · 3 of 3 models
Next 24 hoursFair5.7–12.7 µg/m³ · 3 of 3 models
Next 48 hoursFair5.7–15.0 µg/m³ · 3 of 3 models
Model detail3 available · 48-hour peak table
Model48-hour peakCategoryPeak around
NASA GEOS-CF7.0 µg/m³Good13 Oct, 5:30 AM AEDT
CAMS15.0 µg/m³Fair13 Oct, 1:00 AM AEDT
FMI SILAM5.7 µg/m³Good12 Oct, 7:00 AM AEDT

Highest readings right now

current hourly PM2.5
WarrnamboolGood4.8 µg/m³Indicative sensor
All government monitors (1 total; 1 current)
MonitorPM2.5 µg/m³Air qualityObserved local
Warrnambool †4.8Good11 Oct, 9:00 PM AEDT

† The publishing agency identifies these as indicative sensors. They add local coverage but are not reference-grade monitors.